cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
714
Views
0
Helpful
6
Replies

Port-Channel

ney25
Level 2
Level 2

Dear netpro,

i've some problem for the port-channel, in the switch port, i saw the port-channel unbundled automatically. what is that means actually ? now the server shows intermittent.

Does anyone encoutered this before ?

Time since last port bundled: 25d:00h:48m:57s Gi4/4

Time since last port Un-bundled: 25d:00h:48m:58s Gi4/4

6 Replies 6

syntaxmonster
Level 1
Level 1

Hi,

how does the port-channel and interfaces configuration look like?

sh int port-channel

Hi ,

The configuration as below.

interface Port-channel2

switchport

switchport access vlan 10

speed nonegotiate

interface GigabitEthernet4/4

switchport access vlan 10

speed nonegotiate

spanning-tree portfast

channel-group 2 mode on

interface GigabitEthernet4/5

switchport access vlan 10

speed nonegotiate

spanning-tree portfast

channel-group 2 mode on

Regards,

Jack

Configuration was pasted, does anyone know why the Port-Channel suddenly unbundled by it self ?

Regards,

Jack

Hello,

what do you have connected to those ports ? A server with two NICs ?

Regards,

Nethelper

yes .. this server has 2 NICs and connected to the switch port.

Regards,

Jack

Hello Jack,

from your original post:

Time since last port bundled: 25d:00h:48m:57s Gi4/4

Time since last port Un-bundled: 25d:00h:48m:58s Gi4/4

Do you actually get these log entries frequently ? The message would normally appear when the channle is first formed.

Are the NIC´s Gigabit NIC´s ? Try and force the speed to a fixed setting (100MB Full Duplex) on both the NIC and the switchport, and check if that makes a difference.

Regards,

Nethelper

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: