I was having major collision issues on my LAN and determined I had mismatched duplexing. After hard coding my Cat 2950-12 (12 port) for full duplex, speed 100, all collisions ceased but a new error appeared. I get a mismatched duplex on port 22. This is odd because this is a 12 port switch. Any ideas?
The error might not be really referring to the physical port. The bug toolkit is located under Tools in the Tac site.You could check for possible bugs.Another possiblity is the presence of a logical internal port. Please check for it.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...