We r having 3 routers. Router 1 is the internet gateway. Router2 and 1 is on the same lan. We r using nat on router 1 to access resources of the LAN. Now router 3 and router 2 are interconnected. Router 3 is having some resources which we want to share outside through internet. We can't put second ip address in the resources. How can I do tht through router1? Will static nat mapping work which i hopw will not since the lan ip ranges r diff in router 1 and 3. Thnx in dvance..... for any solution.....
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...