I am sucessfully configured my LAN switches for port security auto shutdown and max-mac-count 1 in order to protect any body to plug they laptop or any other device to get connected with my network without authorized approval. I knew it is hactak but security is our prime consideration. We are using Ciscoworks2000 for managment and my switches are 6509 & 3500 series.
My concern here is, if any body violated the rule I should get email message by informing that, this purticular port is shutdown, based on that I can take some action. Somebody earlier suggested me that with the help of RTM or DFM we can configure some script to get that, but I didn't find any thing, please suggest or advice me...
I think you could get the information using RTM or DFM, you just need to set the rule up. You should also be able to see it if you have a syslog and the appropriate traps set. A lot of the script work for W2K is not very detailed and sparse.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...