Re: Port Security Setting to block Rogue Wireless Access Point I
This depends on if the access point in question has a mac address that is entered in the cam table. If it does, then obviously the first client will end up causing the port to be disabled. If it doesn't then the second client will (assuming that you are configured for only a single mac address).
Keep in mind that by enabling port security you are potentially increasing the amount of administration you have to do. You can also look at using bpduguard to accomplish this same thing since this will shut down a port in portfast mode if a bpdu is received on it.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.