Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

port usage

How can I check the port usage on a Cisco 2600 and 1600 router series. How can i check the data line usage and what is the difference between port and line usage if any?

2 REPLIES
New Member

Re: port usage

what do you mean by the word "port"??

tcp/udp ports?

as for data line usage:

a show interface dial 1 yields the following :

-----cut------------

MTU 1500 bytes, BW 1500 Kbit, DLY 20000 usec,

reliability 255/255, txload 1/255, rxload 1/255

----------cut-------------

as you can see my dialer interface is not under a load at all

txload and rxload are only at 1/255 usage.

New Member

Re: port usage

OK since there is no answer........

NBar will give you some insight as to the protocol usage...

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fqos_c/fqcprt1/qcfnbar.htm#1003282

100
Views
0
Helpful
2
Replies