I have three 6500's, 2-6509's 1-6506 all with 2500W ps's. In one W6509 and one P6506 I have that 10/100 I mentioned it's using 100W and 2.46 amps. The other A6509 is using twice that 200W and 4.79Amp.on the same 10/100 module. The only difference is that A6509 has all 48 ports used. The other two have about 12-15 port used.
Can someone with a WS-X6348-RJ-45 in a 6500 chassis do a sh power and tell me how much power it's using. Watts and Amps please.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...