Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

power consumption Cat.2960

Hello!

Is it possible to check current power consumption of Cat.2960.

Maybe it is possible from EXEC or by SNMP request?


3 REPLIES
Gold

power consumption Cat.2960

show env

SYSTEM POWER SUPPLY STATUS
==========================
Internal Power Supply  Type: AC-POE
Internal Power Supply  12V Output Status: Normal
Internal Power Supply  POE -48V Voltage Status: Normal

External Redundant Power Supply is absent or powered off

SYSTEM FAN STATUS
=================
Fan 1 OK, Low speed setting
Fan 2 OK, Low speed setting
Fan 3 OK, Low speed setting
Fan 4 OK, Low speed setting

SYSTEM TEMPERATURE STATUS
=========================
Intake Left temperature: 25 Celsius, Normal
Intake Right temperature: 26 Celsius, Normal
Exhaust Left temperature: 33 Celsius, Normal
Exhaust Right temperature: 30 Celsius, Normal
CPU temperature: 51 Celsius, Normal
Power Supply Unit temperature: 44 Celsius, Normal

REAL TIME CLOCK BATTERY STATUS
==============================
Battery OK (checked at power up)

SYSTEM POWER
===============
Motherboard Components Power consumption = 79.1 W
NM/SM slot 1 Power consumption = 62.1 W
Total System Power consumption is: 141.2 W

Environmental information last updated 00:00:15 ago

power consumption Cat.2960

Hello. Thanks for answer.

sh env is OK for cat 6500 as example, but in cat. 2960 there is no such output.

WS-C2960-48TT-L for examle:

============================

sh env all

FAN is OK

TEMPERATURE is OK

POWER is OK

RPS is NOT PRESENT

============================

WS-C2960S-24TS-L:

sh env all

FAN is OK

TEMPERATURE is OK

Temperature Value: 34 Degree Celsius

Temperature State: GREEN

Yellow Threshold : 50 Degree Celsius

Red Threshold    : 60 Degree Celsius

SW  PID                 Serial#     Status           Sys Pwr  PoE Pwr  Watts

--  ------------------  ----------  ---------------  -------  -------  -----

1  Built-in                                         Good

SW  Status          RPS Name          RPS Serial#  RPS Port#

--  -------------   ----------------  -----------  ---------

1   <>              <>

==================================

There is no information about power consumtion...

Gold

power consumption Cat.2960

it might be model/IOS feature based. 

270
Views
0
Helpful
3
Replies
CreatePlease login to create content