Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Power up

I have 2x 2950's. One reboots fine the other needs to be forced to be rebooted. What do i need to to make sure it starts clean everytime ?

Thanks in advance

Andy

  • Other Network Infrastructure Subjects
2 REPLIES
Cisco Employee

Re: Power up

check for bootvariable setting

switchC#sh boot

BOOT path-list: flash:c2950-i6q4l2-mz.121-12c.EA1.bin <<<-----

Config file: flash:config.text

Private Config file: flash:private-config.text

Enable Break: no

Manual Boot: no

HELPER path-list:

NVRAM/Config file

buffer size: 32768

switchC#dir

Directory of flash:/

2 -rwx 2774747 Mar 01 1993 00:09:33 c2950-i6q4l2-mz.121-12c.EA1.bin

3 -rwx 108 Mar 01 1993 00:01:13 info

4 -rwx 856 Mar 01 1993 01:47:12 vlan.dat

5 -rwx 286 Mar 01 1993 00:10:55 env_vars

7 -rwx 2490607 Mar 01 1993 00:02:26 c2950-i6q4l2-mz.121-9.EA1.bin

8 drwx 704 Mar 01 1993 00:03:14 html

19 -rwx 2055 Mar 01 1993 04:02:39 config.text

21 -rwx 5 Mar 01 1993 04:02:39 private-config.text

7741440 bytes total (799232 bytes free)

switchC#

New Member

Re: Power up

Many thanks

I had to reset the manual boot option to no. but that has helped

77
Views
0
Helpful
2
Replies