Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

PPP Callback with dialer profiles

Hi All

I have a 3640 with a 4 port bri module at the central site and a 2500 at the remote. I am using dialer profiles on both routers and am dialing into the 3640 from the 2500 and then wish to initiate call back to the 2500. When I try this it just wont work. I have tried using the dialer callback xxxx callback command on the server plus all the other commands but it just wont dialer back the client. Anyone got any ideas.

Regards

2 REPLIES
Community Member

Re: PPP Callback with dialer profiles

Try using the ppp callback on the dialer interface and the physical interface.

Cisco Employee

Re: PPP Callback with dialer profiles

Here is the url which has working sample config for "caller ID callback"..Pl. make sure you have it..

http://www.cisco.com/warp/public/793/access_dial/Isdn_callerID.html

If its still dosen't work..we need to see the debug

debug isdn q931

debug ppp authe

debug ppp nego

debug ppp cbcp

debug callback

165
Views
0
Helpful
2
Replies
CreatePlease to create content