Hello,
I have two routers,ppp enc etc. Chap authentication failed on one of it. (username passwort are ok.)
If I want to configure BRI0 with ppp authentication chap , message
'Cannot change ppp values of hunt group member '.
I want to have same config on both routers.
config of routers from where chap works:
===============================================
interface BRI0
description connected to unixrout
no ip address
encapsulation ppp
dialer rotary-group 1
isdn switch-type basic-net3
isdn caller 1234
isdn calling-number 4321
no cdp enable
ppp authentication chap
!
interface FastEthernet0
description connected to LAN
ip address 192.168.2.10 255.255.255.0
speed auto
!
interface Dialer1
description connected to
ip address x.x.x.2 255.255.255.252
encapsulation ppp
no ip split-horizon
dialer in-band
dialer idle-timeout 30
dialer caller 4321
dialer map ip x.x.x.1 name xxxx 1234
dialer hold-queue 10
dialer-group 1
no cdp enable
ppp authentication chap
!------------------------------------------
router with error message during config chap:
interface BRI0
description connected to Germani
no ip address
ip directed-broadcast
encapsulation ppp
dialer rotary-group 1
isdn switch-type basic-net3
isdn caller 4321
isdn calling-number 1234
no cdp enable
!
interface Dialer1
description connected to Germani
ip address x.x.x.1 255.255.255.252
no ip directed-broadcast
encapsulation ppp
no ip split-horizon
dialer in-band
dialer idle-timeout 30
dialer caller 4321
dialer map ip x.x.x.2 name Germani 1234
dialer hold-queue 10
dialer-group 1
no cdp enable
ppp authentication chap
!
--------------------------------------------
Thanks Ruedi