I treating configure ppp multilink, I hope that it will has to be optimal, but when i bloked 1 E1´s (ppp multilink over 4 E1´s), my ping miss until 50 percent, and with it could lose my BGP session, Do somebody could help me?
For exit of a doubt, I would like than you examine my config, and what will be the result at normal operation? of course when E1 is down, or make flapping, please i need your comments or anything suggest aditional.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...