Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

pppoe over "standard" ether port on 2611

I have an "ether" ADSL modem (Alcatel). Can I plug the ether side of that modem into et0 on my 2611? Will the 2611 handle/negotiate pppoe on that port? I'm used to using a "dialers" interface for this sort of thing. So I guess the q' is - can I put a dialer on et0 and expect it to work?

Then the other ether (et1) on the 2611 could just route to my LAN.

1 REPLY
New Member

Re: pppoe over "standard" ether port on 2611

I have the same situation this dosn't work with cisco ioses. you need the ios with ending YB or XL

The ios with ending .121-5YB works with pppoe the isdn dosn't work. the ios wirh ending .121-4 XL crashed the AAA Server when the router is starting up, you can not login on the router via console or telnet. in my situation i using a standard ios .122-6a and connect an Zyxel R642R-I on my second Fasteth0/0. This Router is directly connectet to my ISP over adsl. This works.

83
Views
0
Helpful
1
Replies