11-10-2010 01:39 AM - edited 03-03-2019 06:07 AM
Hi!
This week I changed our PPPoE dial-in router from a Cisco 3660 (SW: 12.4.25) to a Cisco 2901 (SW 151-2.T2-Universal Image).
Now I have the problem that I could not make a dial-in connection to this router. I get an error in the PPP-Authorization.
I want to get the IP-Address per radiusattribut "Framed-IP-Address". With the version 12.4. it works fine.
DEBUG:
Nov 10 09:35:23.277: ppp29 PPP: Using AAA Unique Id = 104
Nov 10 09:35:23.277: ppp29 PPP: Authorization required
Nov 10 09:35:25.289: ppp29 PPP: Sent PAP LOGIN Request
Nov 10 09:35:25.301: ppp29 PPP: Received LOGIN Response PASS
Nov 10 09:35:25.301: ppp29 PPP AUTHOR: Author Data NOT Available
Nov 10 09:35:25.301: ppp29 PPP: Sent LCP AUTHOR Request
Nov 10 09:35:25.301: ppp29 PPP: Sent IPCP AUTHOR Request
Nov 10 09:35:25.301: ppp29 LCP: Received AAA AUTHOR Response PASS
Nov 10 09:35:25.301: ppp29 PPP: Receive Attrs from[author] Keep[LCP] MERGE
Nov 10 09:35:25.301: ppp29 PPP: Keep Attr: service-type 2 [Framed]
Nov 10 09:35:25.301: ppp29 PPP: Updated the attr service-type in datalist
Nov 10 09:35:25.301: ppp29 PPP: Skip Attr: addr-pool "pool-edsl"
Nov 10 09:35:25.301: ppp29 PPP: Skip Attr: addr 213.174.251.199
Nov 10 09:35:25.305: ppp29 IPCP: Received AAA AUTHOR Response PASS
Nov 10 09:35:25.305: ppp29 PPP: Receive Attrs from[SSS] Keep[NCPs] MERGE
Nov 10 09:35:25.305: ppp29 PPP: Skip Attr: service-type 2 [Framed]
Nov 10 09:35:25.305: ppp29 PPP: Keep Attr: addr-pool "pool-edsl"
Nov 10 09:35:25.305: ppp29 PPP: Updated the attr addr-pool in datalist
Nov 10 09:35:25.305: ppp29 PPP: Keep Attr: addr 213.174.251.199
Nov 10 09:35:25.305: ppp29 PPP: Updated the attr addr in datalist
Nov 10 09:35:25.313: %LINK-3-UPDOWN: Interface Virtual-Access3, changed state to up
Nov 10 09:35:25.313: Vi3 LCP AUTHOR: Process LCP Author Data
Nov 10 09:35:25.313: Vi3 LCP AUTHOR: Process Attr: service-type
Nov 10 09:35:25.313: Vi3 LCP AUTHOR: Authorization succeeded
Nov 10 09:35:25.313: Vi3 PPP: Store Author Attr: addr-pool
Nov 10 09:35:25.313: Vi3 PPP: Store Author Attr: addr
Nov 10 09:35:25.317: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access3, changed state to up
Nov 10 09:35:25.317: Vi3 IPCP AUTHOR: Start. Her address 0.0.0.0, we want 0.0.0.0
Nov 10 09:35:25.317: % IPCP AUTHOR Vi3: Attributes addr and addr-pool are mutually exclusive
---->> I think this is my problem - have anyone an idea?
Nov 10 09:35:25.317: Vi3 IPCP AUTHOR: Authorization denied
Nov 10 09:35:25.317: Vi3 IPCP AUTHOR: Done. Her address 0.0.0.0, we want 213.174.251.199
Nov 10 09:35:25.357: Vi3 PPP: Sending Acct Event[Down] id[104]
Nov 10 09:35:25.365: Vi3 PPP: Clearing AAA Unique Id = 104
Thanks,
Hannes
11-26-2010 08:25 AM
need more information like
->who is the CPE
-> configs on this new LAC/LNS
-> config on CPE (If Cisco)
-> Radius profile and VSA's.
Shelley.
11-28-2010 11:14 PM
Hi Shelley!
Thanks for your answer. We have solved the problem.
It was a wrong configuration in the templete.
The attribut "Framed-IP-Address" was configured in the templete and in the default-attributes of the radius-server.
Thanks for help!
Hannes
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide