Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PRI dial backup

Hi,

I have a site with an E1 PRI for dial-in access (ISDN BRI and analog).

Can I use this same line as a backup using dialer watch?

If yes, how?

thanks

  • Other Network Infrastructure Subjects
2 REPLIES
New Member

Re: PRI dial backup

Hi,

Yes , you can do this. In PRI , define 2 pool-member & create 2 dialer interfaces . One is for incoming , the other is for outgoing calls. In the second dialer , write dialer map for the watched prefix.

Hope this will help you.

Cisco Employee

Re: PRI dial backup

sure..you can use the same line for backup usign dialer-watch..Here are the couple of links which discuss that in detail with sample config and debug

http://www.cisco.com/warp/public/793/access_dial/bri_isdn_11048.html

http://www.cisco.com/warp/public/793/access_dial/bri_isdn_11049.html

96
Views
0
Helpful
2
Replies