Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

PRI switch types

which of the cisco pri switch type should be used to connect to a PBX which supports

""- Euro-ISDN E-DSS1and ETSI-compliant""

Many thanks

Larry_s

3 REPLIES
Community Member

Re: PRI switch types

For the E-DSS1 you'd use switch type basic-net3.

Here's a link to the different Cisco supported ISDN switch types.

http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps1818/products_command_reference_chapter09186a008007ff75.html

Community Member

Re: PRI switch types

Chuck

Thanks for the reply

Can a PRI interface be configured for Basic-Net3

I know this id normally a BRI switch type.

Larry_s

Community Member

Re: PRI switch types

It should be able to be configured. It is not a BRI only switch type. According to Cisco this is what basic-net3 is for. To verify you could call your provider for more info.

basic-net3 NET3 ISDN and Euro-ISDN switches (UK and others), also called E-DSS1 or DSS1

221
Views
0
Helpful
3
Replies
CreatePlease to create content