Printer is printing garbage with new T1 connection
I have a customer that was using a 56k leased line between two locations. The remote location had citrix terminals and a printer that connected to a server back at the main office (using IP). When we upgraded the 56k line to a full T1 the printer now prints some of the spooled info but not all, when we switch back to the 56k it works fine. No special configs are in use just an IP address on each end of the connection using HDLC etc....any ideas why we would be getting garbled printing?
Re: Printer is printing garbage with new T1 connection
yes, all other IP traffic works correctly, the dumb terminals use windows terminal services to communicate with the server and that works great. So If I sniff the line and see corrupt packets, how do I correct that? I dread telling SBC to fix it heh...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.