Setting up Private/Vlans and need a relativley simple and quick method to test this installation. I am concerned with the added security this technology is providing. I want to test to make sure the traffic is indeed secured.
DMZ servers are only supposed to process incoming requests from the Internet, and eventually initiate connections to some back-end servers located at an inside or other DMZ segment, such as a database server. At the same time, DMZ servers are not supposed to talk to each other or initiate any connections to the outside world. This clearly defines the necessary traffic flows in a simple trust model.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...