Users on my Private WAN having hard time accessing
Corp. servers that have only the Iternet-FW address as their Default Gateway.
Some how the Local Route on the FireWall is not working
for local server to private WAN users, and that Dipending on the SSesion initiator, It allways work from the server side but not so from remote user to servers connections.some times I have to ping form the server to the remote WAN users to "open" the way, and they work, until next time.
Adding specific Route back on the servers thrue the private WAN router solve the problem.
Can you give us a little bit more info on your network setup? What are you running as far as Routing Protocol? Also what about your local network, do you have multiple VLANs, and if so, what's doing the inter-Vlan routing? And last, what do you use for firewall?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...