Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Problem copying c3660-i-mz.121^[O-5.T.bin

I need to back up the IOS on my 3662 to a Flash Card. The "sh flash" shows c3660-i-mz.121^[O-5.T.bin. The "dir flash:" from the ROMMON mode shows c3660-i-mz.121-5.T.bin. I received the following error when I try to copy either file to slot1: (No such file or directory). Can anyone help?

rommon 1 > dir flash:

File size Checksum File name

5861672 bytes (0x597128) 0x0542 c3660-i-mz.121-5.T.bin

830 bytes (0x33e) 0x0f52 n

Router#copy flash slot1:

Source filename []? c3660-i-mz.121-5.T.bin

Destination filename [c3660-i-mz.121-5.T.bin]?

Erase slot1: before copying? [confirm]

Erasing the slot1 filesystem will remove all files! Continue? [confirm]

Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...erased

Erase of slot1: complete

%Error opening flash:c3660-i-mz.121-5.T.bin (No such file or directory)

Router#sh flash

System flash directory:

File Length Name/status

1 5861672 c3660-i-mz.121^[O-5.T.bin

2 830 n

[5862632 bytes used, 2525976 available, 8388608 total]

8192K bytes of processor board System flash (Read/Write)

Router#copy flash slot0:

Flash card inserted. Reading filesystem...done.

Source filename [c3660-i-mz.121^[O-5.T.bin]?

Destination filename [c3660-i-mz.121^[O-5.T.bin]?

Erase slot0: before copying? [confirm]

Erasing the slot0 filesystem will remove all files! Continue? [confirm]

Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...erased

Erase of slot0: complete

%Error opening flash:c3660-i-mz.121^[O-5.T.bin (No such file or directory)

Router#

2 REPLIES
Bronze

Re: Problem copying c3660-i-mz.121^[O-5.T.bin

Try adding a : after flash, as in copy flash: slot0:

Another option would be to specify the filename in the copy statement -

copy flash:c3660-i-mz.121^[O-5.T.bin slot0:

New Member

Re: Problem copying c3660-i-mz.121^[O-5.T.bin

Thanks for your help. I tried your suggestions, but I received the same results. I think I will get new IOS for the router.

Router#copy flash: slot0:

Source filename [c3660-i-mz.121^[O-5.T.bin]?

Destination filename [c3660-i-mz.121^[O-5.T.bin]?

Erase slot0: before copying? [confirm]

Erasing the slot0 filesystem will remove all files! Continue? [confirm]

Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...erased

Erase of slot0: complete

%Error opening flash:c3660-i-mz.121^[O-5.T.bin (No such file or directory)

Router#

Router#copy flash:c3660-i-mz.121^[O-5.T.bin slot0:c3660-i-mz.121^[O-5.T.bin

Destination filename [c3660-i-mz.121^[O-5.T.bin]?

Erase slot0: before copying? [confirm]

Erasing the slot0 filesystem will remove all files! Continue? [confirm]

Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...erased

Erase of slot0: complete

%Error opening flash:c3660-i-mz.121^[O-5.T.bin (No such file or directory)

Router#copy flash:c3660-i-mz.121^[O-5.T.bin slot0:

Destination filename [c3660-i-mz.121^[O-5.T.bin]?

Erase slot0: before copying? [confirm]n

%Error opening flash:c3660-i-mz.121^[O-5.T.bin (No such file or directory)

Router#

131
Views
0
Helpful
2
Replies