Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Problem in configuring RADIUS authentication

Hi

I have two Access Servers:

Access server A: IOS 11.0(16) with bootstrap version 11.0(10c)

Access Server B: IOS 11.1(5) with bootstrap version 5.2(8a)

As radius options are not available on 11.0, so I decided to make an image of IOS from Access Server B and to install this image on Access Server A. After doing so show version command on Access Server A shows IOS 11.1(5) with bootstrap 11.0(10c). But still I am not able to issue any radius related command on Access Server A, such as "radius-server host ip".

Such radius commands are working fine on Access Server B.

Both Access Servers are 2511.

Can you tell me how can I use radius related commands in this case?

Thanks for your time.

Aqeel Anwar

aqeel73@yahoo.com

168
Views
0
Helpful
0
Replies
CreatePlease to create content