Hello, I have a problem of network configuration in which I do not find the solution if somebody has an idea I thank him in advance.
The network is made by 21 machines working with Win NT4 connected on a switch Catalyst 2900, him even connected to a controleur AS400 and a Transpac line who connect the system with a wan which is the bridge of the protocol IP of stations.
I concerns is of linked a router which will make the connection of stations towards the internet, this router too being connected on the switch. This is my probleme and I do not find the solution.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...