Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

problem when configurign routing on 3550

My Cat 3550 is EMI switch, but I cannot enable ospf on my switch:

SW2#sh ver

Cisco Internetwork Operating System Software

IOS (tm) C3550 Software (C3550-I9Q3L2-M), Version 12.1(20)EA1a, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2004 by cisco Systems, Inc.

Compiled Mon 19-Apr-04 21:42 by yenanh

Image text-base: 0x00003000, data-base: 0x006B3454

ROM: Bootstrap program is C3550 boot loader

SW2 uptime is 2 minutes

System returned to ROM by power-on

System image file is "flash:c3550-i9q3l2-mz.121-20.EA1a.b"

cisco WS-C3550-24 (PowerPC) processor (revision J0) with 65526K/8192K bytes of memory.

Processor board ID CAT0724X15Z

Last reset from warm-reset

Running Layer2/3 Switching Image

Ethernet-controller 1 has 12 Fast Ethernet/IEEE 802.3 interfaces

Ethernet-controller 2 has 12 Fast Ethernet/IEEE 802.3 interfaces

Ethernet-controller 3 has 1 Gigabit Ethernet/IEEE 802.3 interface

Ethernet-controller 4 has 1 Gigabit Ethernet/IEEE 802.3 interface

24 FastEthernet/IEEE 802.3 interface(s)

2 Gigabit Ethernet/IEEE 802.3 interface(s)

The password-recovery mechanism is enabled.

384K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 00:0D:29:5D:A5:00

Motherboard assembly number: 73-5700-10

Power supply part number: 34-0966-02

Motherboard serial number: CAT07240GDH

Power supply serial number: DTH0723011R

Model revision number: J0

Motherboard revision number: A0

Model number: WS-C3550-24-EMI

System serial number: CAT0724X15Z

Configuration register is 0x10F

SW2(config)#router ospf 1

Unknown routing protocol

Can sopme one help me on it?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: problem when configurign routing on 3550

2 REPLIES

Re: problem when configurign routing on 3550

New Member

Re: problem when configurign routing on 3550

Thanks for your reply. the problem is solved!

121
Views
0
Helpful
2
Replies
CreatePlease login to create content