Re: problem with a wic card(1ENET) for a cisco 1720
The WIC-1ENET is a 10Baset-T Ethernet card that can be used in any Cisco 1700 series router WIC or WIC/VIC slot. Using software Release 12.2(2)XJ, you are no longer limited to using only one 10Baset-T Ethernet card in Slot 0; 10Baset-T Ethernet cards now work in either Slot 0 or Slot 1, or both Slot 0 and Slot 1. Release 12.2(2)XJ software is compatible with previously-shipped versions of 10Baset-T Ethernet cards, therefore only a software upgrade is required to provide this added capability.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...