Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problem with Cisco 3620

Hi all,

I have a 3620 with dual Channelaized E1 and 30 Digital modems as an access server.

This configuration work well for 2 years, but now the router go down with this log

%OIRINT: OIR Event has occurred oir_ctrl 1000 oir_stat CFCE

*** Watch Dog Timeout ***

PC = 0x601c01f8, SP = 0x60d44410

Any idea?

Thanks, Victor.

1 REPLY
Bronze

Re: Problem with Cisco 3620

There should have been more OIRINT output statements, indicating the slot that was IORed (inserted or removed). Try to confirm is there was an OIR event; if it happens again, send along "sh stack", and the output at the time of the crash (as you did above). There have been a couple of bugs submitted that look similar to your problem, but most were closed due to either the problem not being seen again, the HW being bad, or a software upgrade eliminating the problem.

124
Views
0
Helpful
1
Replies
CreatePlease to create content