07-19-2002 01:13 AM - edited 03-02-2019 12:01 AM
Hi, I am facing problem with ISDN which description is as follows;
Customer has SIte A (Central) & Site B (Remote).
When Site B calls (which is a requirement & a recommended procedure, remote making call to Central when user require) Site A, Site B router is not able to connect (note that BRI interface is showing UP & gets disconnected after 24 Sec. This happens for all calls from site B to A.
But, if call is initaited from Site B to Site A, there is no problem and network is reachable.
Hardware is 2600 (Central) & 1603R (Remote).
Let me know if anyone has faced similar problem. Thanks in advance.
Bhupesh
07-19-2002 01:18 AM
make debug ppp authentication to see if it's a problem of password.
use show dialer to control the remaining time before disconnecting
07-19-2002 05:37 AM
In addition to authentication, also look at the speed which your remote router is trying to connect. If the call is not able to connect at 64k, I have seen instances where calls drop after a 30 second period. Try forcing the call to connect at 56k.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide