Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Problem with Switch at BOOT

Hi I have this problem when I boot the switch could you please tell me if it could be faulty hardware

C3500XL Boot Loader (C3500-HBOOT-M) Version 12.0(5.3)WC(1), MAINTENANCE INTERIM SOFTWARE

Compiled Mon 30-Apr-01 07:51 by devgoyal

starting...

Base ethernet MAC Address: 00:08:a3:58:bc:00

Xmodem file system is available.

Initializing Flash...

flashfs[0]: 163 files, 2 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 3612672

flashfs[0]: Bytes used: 3095040

flashfs[0]: Bytes available: 517632

flashfs[0]: flashfs fsck took 4 seconds.

...done Initializing Flash.

Boot Sector Filesystem (bs:) installed, fsid: 3

Parameter Block Filesystem (pb:) installed, fsid: 4

Loading "flash:c3500xl-c3h2s-mz.120-5.WC8.bin"...######################################################################################################################################################################################

File "flash:c3500xl-c3h2s-mz.120-5.WC8.bin" uncompressed and installed, entry point: 0x3000

executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco Internetwork Operating System Software

IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)WC8, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2003 by cisco Systems, Inc.

Compiled Thu 19-Jun-03 12:37 by antonino

Image text-base: 0x00003000, data-base: 0x0034E2F4

Initializing C3500XL flash...

flashfs[1]: 163 files, 2 directories

flashfs[1]: 0 orphaned files, 0 orphaned directories

flashfs[1]: Total bytes: 3612672

flashfs[1]: Bytes used: 3095040

flashfs[1]: Bytes available: 517632

flashfs[1]: flashfs fsck took 4 seconds.

flashfs[1]: Initialization complete.

...done Initializing C3500XL flash.

C3500XL POST: System Board Test: Passed

C3500XL POST: Daughter Card Test: Passed

C3500XL POST: CPU Buffer Test: Passed

C3500XL POST FAILURE: CPU Notify RAM Test: Failed

C3500XL POST FAILURE: Error with CPU Interface CPU Notify RAM POST.

C3500XL POST FAILURE: CPU Interface Test: Failed

C3500XL POST FAILURE: Cannot test CPU Interface ASIC due to failure of

C3500XL POST FAILURE: CPU Interface CPU Notify RAM

C3500XL POST FAILURE: Cannot test CPU Interface ASIC due to failure of

C3500XL POST FAILURE: Testing Switch Core: Failed

C3500XL POST FAILURE: Testing Buffer Table: Failed

C3500XL POST FAILURE: Data Buffer Test: Failed

C3500XL POST FAILURE: Configuring Switch Parameters: Failed

C3500XL POST FAILURE: Switch Core failing because of CPU Interface Failure

C3500XL POST FAILURE: AT: Failing because of CPU-Interface failure

C3500XL POST FAILURE: Cannot test Modules due to failure of Switch Core POST

Thanks

Rick

1 REPLY
Bronze

Re: Problem with Switch at BOOT

hardware error. call cisco and describe the POST FAILURES.

200
Views
0
Helpful
1
Replies
CreatePlease to create content