Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Problem with the distribute image ... Please help

Hello,

My problem is the following one :

I want upgrade several of my switches (Catalyst 3550)from an IOS to another, so I use

CW2000-->RME-->Software Management-->Distribute images

- Device type : cisco IOS

- I select my switches

- here what I have on the screen

================

192.168.128.31

C3550, 63 MB RAM

flash:c3550-i9q3l2-mz.121-11.EA1/c3550-i9q3l2-mz.121-11.EA1.bin, 12.1(11)EA1, LAYER_2|MIN_DRAM_MEG=32

Image: 12.1(12c)EA1-LAYER_3|MIN_DRAM_MEG (5.33 MB )

Flash: flash (11.08 MB/15.26 MB)

192.168.128.33

C3550, 63 MB RAM

flash:c3550-i9q3l2-mz.121-11.EA1/c3550-i9q3l2-mz.121-11.EA1.bin, 12.1(11)EA1, LAYER_2|MIN_DRAM_MEG=32

Image: 12.1(12c)EA1-LAYER_3|MIN_DRAM_MEG (5.33 MB )

Flash: flash (11.08 MB/15.26 MB)

====================

- Next

Verify Image Upgrade : Status=Passed

- Next

- Next

Time to download : immeditely

reboot : immediately after download

Next ....

And the problem is :

Just the first switch is upgraded, it seems perfect but I receive a mail :

"""""""""""

Loading image file to flash device : c3550-i5q3l2-tar.121-12c.EA1.tar --> flash:c3550-i5q3l2-tar.121-12c.EA1.tar

Loading image file to flash device is complete

Retrieving config file during software upgrade process ...

Current device config has been backed up to C:/PROGRA~1/CSCOpx/files/schedule/2/192.168.128.23_cfg

Reloading device ...

Reboot complete, Verifying Software Upgrade now ...

Reboot done successfully and the device is back to normal operation ...

Error: Job has halted execution.

Reason: Job may have been halted because of machine reboot.

"""""""""""

I don't understand, please help.

We have 17 new switches and I don't want upgrade them one by one....

Thanks in advance

Best regards,

Guillaume

  • Other Network Infrastructure Subjects
1 REPLY

Re: Problem with the distribute image ... Please help

Hi,

I've noticed similar problem upgrading Cat3500XL switches:

"Reloading device ...

Reboot failed on device.

Error Info Code: '4259'

Message: 'Device Error: Device reboot operation failed.'

.

.

Job encountered error. Job aborted."

But after issuing another image distribution job with "Do not reboot" option everything was OK.

So there might be a bug regarding "Reboot" job option.

I would try to distribute images to 2 devices without reboot option and see if it works OK.

Regards,

Milan

118
Views
0
Helpful
1
Replies
This widget could not be displayed.