1) when the ios-vtp-client restarts after power failure, everything works fine.
2) when the catos-vtp-client restarts after power failure, everything works fine, too.
3) if both (ios-vtp-client and catos-vtp-client) restart after power failure at the same time the catos-vtp-client-switch loses its connection/vlan database.
the reason seems to be that the catos-switch is faster in power up and couldn´t connect the vtp-server after booting.
If you change the vlan-database on the vtp server after both switches are running, the catos-switch learns its vlan database and everything works fine, without change in the vlan database the switch is still out of order.
workaround: configure every catos-switch behind an ios-switch in vtp-server mode
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.