08-15-2006 10:47 AM - edited 03-03-2019 04:31 AM
We are having slow response at one location that is imaging a pc locally.. on the Cisco WS-C3550-24 switch the interface is showing ...
5 minute input rate 7965000 bits/sec, 681 packets/sec
5 minute output rate 132000 bits/sec, 257 packets/sec
which I think is might be the problem, any ideas??
08-15-2006 10:59 AM
The output posted says that is topping out @ 8Mbps input which doesn't mean that is a problem per se.
Were you able to image at another location with much faster speeds ?
Did you configure the NIC with auto/auto or 100/FD ?
Did you match these settings at the switch port ?
Are you getting any errors on the interface ?
08-21-2006 05:02 AM
I figured out the problem, thank you, there was a dumb hub there that the pc is connected to first... a very old hub! But to answer your questions above, yes at other locations it was not an issue, and the nic's are configured for auto, the switch matches, and no errors on the interface......
08-21-2006 05:39 AM
Thanks for the update !
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide