11-12-2003 11:41 AM - edited 03-02-2019 11:40 AM
Hi,
Has anybody present problems with the Aux port of a 2520, I can't get the router to detect a CDMA1x modem that I'm using for a wireless connection (I know this looking at: debug confmodem output). When I connect the aux port to an analog modem, the aux port detects the modem and configures it, but when I try to do the same with the digital modem is not possible. The weird thing is that this is working with a MC3810 through the aux port, I'm using the same cable, same configuration but it doesn't detect it.
11-18-2003 11:26 AM
Check if the 2520 supports such a modem, or if there is any known issue with the software version that you are using.
11-18-2003 12:27 PM
Hello,
you might want to connect to your modem and check what happens on the modem when it is connected to the AUX port. Check out the following site for instructions to use Hyperterminal to talk to your modem:
http://modemsite.com/56k/trouble.asp
Go to the section ´How to check your modem´ on the right, about halfway down.
Regards,
Georg
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: