Has anybody present problems with the Aux port of a 2520, I can't get the router to detect a CDMA1x modem that I'm using for a wireless connection (I know this looking at: debug confmodem output). When I connect the aux port to an analog modem, the aux port detects the modem and configures it, but when I try to do the same with the digital modem is not possible. The weird thing is that this is working with a MC3810 through the aux port, I'm using the same cable, same configuration but it doesn't detect it.
you might want to connect to your modem and check what happens on the modem when it is connected to the AUX port. Check out the following site for instructions to use Hyperterminal to talk to your modem:
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.