Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Problems with IPX-RIP, who knows wat is the problem?

We are experiencing very slow converge time for IPX on a backup router,

type 3600.

We have a seriel line and a ISDN BRI line on th router.

after a seriel line recovery, yhe line comes back, so after the hold time the

ISDN BRI will switch off.

We are continue ipx-pinging a Novell 4 server from the remote site,

there are 2 routes in the routing table, but when de ser. line comes back and BRI line switch off,

there is a converge-time of ca. 240-300 sec, we are missing ping response for this time.

we have ios 12.1 on bord;

we do not know, how this come;

Has somebody an explanation?

2 REPLIES
Bronze

Re: Problems with IPX-RIP, who knows wat is the problem?

That does seem too long, even though the RIP routing tables are not populated until 60-120 seconds. Might be worth talking over with you Cisco TAC rep.

New Member

Re: Problems with IPX-RIP, who knows wat is the problem?

thanks;

84
Views
0
Helpful
2
Replies
CreatePlease to create content