Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

--Problems with Resetting 675 in ROMMON--

--Problems with Resetting 675 in ROMMON--

I suspect the router has been hacked and passwords that did work no logger do. I need to reset the settings on a 675 but can not get into ROMMON. Here is what happens:

1)The boot load is displayed in unreadable asci text.

2)At a console connection I if "ctl + C" is pressed to enter rommon, the connection will hang.

3)If allowed to boot; all alpha text is asci and numeric is readable.

Anyone know of a way to reset the hardware other then rommon?

Thank for any help!!!

~John

3 REPLIES
Cisco Employee

Re: --Problems with Resetting 675 in ROMMON--

You need to hit Control+C right after "hello" is displayed after reboot on console. Here is the step by step instructions for that.

http://www.cisco.com/warp/public/794/600swinstl.shtml

You can re-download the new cbos into 675. Now if it dosen't work at all, you need to replace it with the spare one.

New Member

Re: --Problems with Resetting 675 in ROMMON--

Thank you for your time. Please see point 2 in the original question.

~John

Cisco Employee

Re: --Problems with Resetting 675 in ROMMON--

In that case you just need to replace it with the spare.

112
Views
0
Helpful
3
Replies