Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

procesess CPU running high on 7513

I have 2 7513 in my core ,my procsess cpu is running high on one 7513 and on other its runing low , processing switching is enabled on interface,this started happening when we replaced our catalyst 5509 with a 6509 , and 6509 is not doing any layer 3.when i tyed sh process cpu , the highest process is 15% by IP input .

Before we replaced it was running at 11% now its almost 60%

Can any one suggest me a solution .

Thanks In advance

2 REPLIES
Silver

Re: procesess CPU running high on 7513

you are procees switching all your traffic trun on ip route-cache or ip cef on all the interface this should drop the CPU and the IP INPUT process.

New Member

Re: procesess CPU running high on 7513

This worked thanks for your answer but ,now its only using 30% of the process

But ididnot use ip cef whats it does, can me tell in detail or mail me a link.

thanks once again

84
Views
3
Helpful
2
Replies
CreatePlease to create content