Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Push Button on Nexus 7010

Hi Guys,

I saw a push buttom below the fan module of the nexus 7010. Any idea what that is for?

Thanks.7000 push button.jpg

Everyone's tags (5)
3 REPLIES
Cisco Employee

Push Button on Nexus 7010

Hello,

Nexus 7010 is the only chassis whcih has optional air filter. The filter locates at the bottom. On the picture attached you can see not the FAn but air intake. I think that is the pin to release air filter once the screws are made loose. See the procedrue below

http://www.cisco.com/en/US/docs/switches/datacenter/hw/nexus7000/installation/guide/n7k_replacing.html#wp1109683

Nik

New Member

Push Button on Nexus 7010

Hi Nikolay,

Thanks for the reply.

I went thru the image of the 7010 and saw that the optional air filter seems to be covering the pin. Is it used as some sort of support instead rather than a release pin.

New Member

Push Button on Nexus 7010

Hi All,

I had logged a TAC case with cisco and below is the reply I had gotten from them.

"Regarding the push-pin, this is use to detect whether the air filter is present. YO can check the status with the "show env" command."

Hope this help others in the future as most have have helped me.

Thanks

485
Views
0
Helpful
3
Replies
CreatePlease login to create content