cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
245
Views
0
Helpful
1
Replies

PVLAN and VLAN question

NickNagle
Level 1
Level 1

I need to work out how to add a single port to a VLAN on a switch that is using PVLANS.

For example port 3/7 is in VLAN 600

I want to add port 4/6 to VLAN 600 but am being told 'unable to add port to vlan use pvlan command'

The only PVLAN is isolated, and I do not want port 4/6 isolated, it is a backup server and must be able to connect to other devices.

Any ideas?

Thanks

1 Reply 1

I guess it will look like this (if you run CatOS):

set pvlan mapping PRI_VLAN SEC_VLAN 4/6

Where PRI_VLAN is your primary VLAN id and SEC_VLAN is your isolated VLAN id.

//Mikhail Galiulin

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco