I configured PVLANs in my CAT 6509 ( Primary & Secondary -Community) and tried to extend to another CAT 2924 XL switch through a Trunk port. The Host which is connected on 6509 promiscuous port (which is mapped for the primary VLAN) can be accessed from the host which is in 2924, but only from the Primary VLAN access ports but not from the Secondart VLAN access port. But according to cisco's doc. Primary, secondary PVLANs can be extended across the switces through Trunk. but in my case I am able to extend only the primary not the secondary. Any Ideas?! or am I missing something ?
You can extend both the secondary and primary VLAN. PVLAN is only supported in catalyst 6k and to implement the PVLAN, it has to be in one bridge group/one vlan to communicate L2 information. Troubleshooting will be more easier if you throw some more light into the configuration.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...