11-01-2007 09:34 PM - edited 03-03-2019 05:38 AM
Hi NetPro,
anyone knows this ?
i have no any device using PoE, but i still have this error.
Nov 1 07:53:07: %C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Inline power exceeds threshold: Module status changed to 'Pwr Over'
Nov 1 17:51:13: %C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Inline power exceeds threshold: Module status changed to 'Pwr Over'
Nov 2 10:18:26: %C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Inline power exceeds threshold: Module status changed to 'Pwr Over
M MAC addresses Hw Fw Sw Status
--+--------------------------------+---+------------+----------------+---------
1 000f.2390.5840 to 000f.2390.5841 2.1 12.1(20r)EW1 12.2(20)EWA Ok
2 000f.2472.ad10 to 000f.2472.ad3f 2.0 Pwr Over
3 000f.2472.e6a0 to 000f.2472.e6cf 2.0 Ok
4 000f.2472.ef70 to 000f.2472.ef9f 2.0 Pwr Over
5 000f.2472.a620 to 000f.2472.a64f 2.0 Ok
6 000f.2472.a5f0 to 000f.2472.a61f 2.0 Ok
Power Fan Inline
Supply Model No Type Status Sensor Status
------ ---------------- --------- ----------- ------- -------
PS1 PWR-C45-2800AC AC 2800W good good good
PS2 PWR-C45-2800AC AC 2800W good good good
Power supplies needed by system : 1
Power supplies currently available : 2
Power Summary Maximum
(in Watts) Used Available
---------------------- ---- ---------
System Power (12V) 485 1360
Inline Power (-50V) 0 1400
Backplane Power (3.3V) 0 40
---------------------- ---- ---------
Total 485 2800
Watts Used of System Power (12V)
Mod Model currently out of reset in reset
---- ----------------- --------- ------------ --------
1 WS-X4013+ 110 110 110
2 WS-X4248-RJ45V 65 65 25
3 WS-X4248-RJ45V 65 65 25
4 WS-X4248-RJ45V 65 65 25
5 WS-X4248-RJ45V 65 65 25
6 WS-X4248-RJ45V 65 65 25
-- Fan Tray 50 -- --
----------------------- --------- ------------ -------
Total 485 435 235
Watts used of Chassis Inline Power (-50V)
Inline Power Admin Inline Power Oper
Mod Model PS Device PS Device Efficiency
---- ----------------- ---------------- ---------------- ----------
1 WS-X4013+ - - - - -
2 WS-X4248-RJ45V 0 0 11 10 89
3 WS-X4248-RJ45V 0 0 22 20 89
4 WS-X4248-RJ45V 0 0 28 25 89
5 WS-X4248-RJ45V 0 0 28 25 89
6 WS-X4248-RJ45V 0 0 22 20 89
----------------------- ---------------- ---------------- ----------
Total 0 0 111 100
your reply will be highly appreciated.
thanks,
Regards,
Jackal
11-02-2007 06:02 AM
Hi,
What you are experiencing is documented in Bug ID CSCef49715. Please refer the below URL for details:
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/25ewa/system/message/emsg.html
I hope it helps.
Regards,
Arul
** Please rate all helpful posts **
06-25-2012 01:45 PM
The bug tells that the issues are seen with DC1400 Power supplies. But in this case, it is a AC 2800W. Is this bug applicable to AC power supplies as well ?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: