06-07-2002 08:43 AM - edited 03-01-2019 10:04 PM
I need help configureing an 804 IDSL router for use with Covad IDSL from Speakeasy. This is not the router supported by Speakeasy, so I'm on my own to configure it. The fast step software seems to be geared toward ISDN (asking for connection phone numbers, etc), so I don't think it will work for IDSL. Here is the information I have been given from Speakeasy so far:
router "LAN-side" IP address
router "WAN-side" IP address
range of IPs I have been assigned for my machines
use frame-relay
Can someone provide a very basic IDSL configuration? No DHCP, no NAT, just the most basic connectivity to use as a starting point. The sample configuration I found on the Cisco site has an "unnumbered IP" on the BRI0 interface, which I don't believe is appropriate for my situation.
06-07-2002 11:15 AM
Here is the couple of links which will help you to configure the 804 for IDSL.
For config of 804
http://www.cisco.com/warp/public/794/804idsl_dhcp_unnum.html
For config and troubleshooting
http://www.cisco.com/warp/public/794/802804_idsl.html
Thanks..Tejal
06-07-2002 12:12 PM
Can I use the "Fast Step" configuration software, or is it for ISDN only?
What about ConfigMaker?
06-07-2002 12:24 PM
The first example show the BRI0 interface as "unnumbered" - I have been assigned a static IP for it.
The second example has the BRI0 interface being assigned an IP dynamically, and it has DHCP and NAT.
Also, I don't know what my router is connecting to on the Speakeasy side - do I need to know?
All I want is the most basic config for an 804 IDSL to use as a starting point. I have been given a static IP for the outside interface, and a static IP for the ethernet interface.
06-07-2002 04:04 PM
You can configure the static ip address and mask for both the (bri and ethernet) provided by isp.. Do not configure NAT and DHCP if you don't need to...Tejal
06-09-2002 08:05 PM
What is wrong with this config? I can ping the Ethernet interface from my PC, but not the BRI0 interface, nor the DNS IPs:
! Cisco IOS router configuration file
! Automatically made by Cisco Fast Step v2.2
! Designed for Cisco C804
! June 09, 2002
! Cisco Fast Step Template
no service udp-small-servers
no service tcp-small-servers
service password-encryption
hostname Router
username Router password ******
enable secret ******
no ip source-route
isdn switch-type basic-ni
isdn leased-line BRI0 144
ip routing
ip classless
ip subnet-zero
ip name-server 66.92.159.2
ip name-server 216.231.41.2
interface ethernet 0
keepalive
no shutdown
ip address 66.93.105.225 255.255.255.224
ip route-cache
no ip proxy-arp
no ip directed-broadcast
interface bri 0
ip address 66.92.165.205 255.255.255.0
encapsulation frame-relay IETF
fair-queue 64 16 0
no arp frame-relay
frame-relay lmi-type ansi
no shutdown
no ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 BRI0
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: