Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

QoS catalyst 6500 mls qos command ??

Hi ,

I'm running on catalyst 6500 with sup2 msfc2 pfc2, Catos and Ios on Msfc2.

following the sh ver of my msfc:

Cisco Internetwork Operating System Software

IOS (tm) MSFC2 Software (C6MSFC2-PSV-M), Version 12.1(26)E3, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by cisco Systems, Inc.

Compiled Mon 15-Aug-05 09:55 by ccai

Image text-base: 0x40008F90, data-base: 0x41944000

ROM: System Bootstrap, Version 12.1(4r)E, RELEASE SOFTWARE (fc1)

BOOTLDR: MSFC2 Software (C6MSFC2-PSV-M), Version 12.1(26)E3, RELEASE SOFTWARE (fc1)

cedis-ah1ra uptime is 7 weeks, 4 hours, 6 minutes

System returned to ROM by power-on

System restarted at 09:29:28 Italy Wed Mar 15 2006

System image file is "bootflash:c6msfc2-psv-mz.121-26.E3.bin"

I wish to implement the QoS with a command router(config)#mls qos .... but this command is not present.

Is the software (service provider W/Vip) enable for QoS ?

I need enterprise software ?

Any suggestion is appreciate.

4 REPLIES

Re: QoS catalyst 6500 mls qos command ??

I am not positive on that but I believe it's on by default and you can't disable that globally.

Go under one of the interfaces and issue the command 'mls qos ?' to see if it supports the feature.

HTH,

Sundar

New Member

Re: QoS catalyst 6500 mls qos command ??

Unfortunatly this command is not present also under interface configuration.

On the system appear only feature below.

router-ah1ra#sh mls ?

ip ip keyword

rp rp

router-ah1ra#

How i can solve this problem ?

Seems that the QoS is not present in my version.

Thank's

New Member

Re: QoS catalyst 6500 mls qos command ??

Hi, I believe you are going to have to upgrade code to soemthing 12.2 like 122-17d.SXB10.bin.

New Member

Re: QoS catalyst 6500 mls qos command ??

Hello,

If you are running in Hybrid mode (CatOS on the supervisor and IOS on the MSFC), you do QoS on the supervisor. QoS on the 6500 is called "PFC QoS" because it utilizes the PFC, part of the supervisor.

Here is the configuration guide for Hybrid QoS:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_3/confg_gd/qos.htm

I sent 8.3(4) but you may need to navigate to your version if it's different.

Regards,

John

*Please rate helpful posts.

294
Views
5
Helpful
4
Replies
CreatePlease login to create content