Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

QOS displays

On the Cat6500 running native IOS level 12.1.13 - 12.1.19 when you perform a show policy interface you do not see the stats for the default class. I see this on other platforms and also on the 6500 in 12.1.8x. Does anyone know if this is a bug or is this something that we are not expected or capable of displaying?

Thanks

Dave

1 REPLY
Bronze

Re: QOS displays

Please take a look at the following document.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/12111bex/cmdref/show1.htm#26414

For OSM WAN interfaces only, if policing is configured within a policy map, hardware counters are displayed and the class-default counters are not displayed. If policing is not configured within a policy map, the class-default counters are displayed.

80
Views
0
Helpful
1
Replies
CreatePlease to create content