Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

QoS DSCP Analysis

Hello All,

I´m trying to find a way to find how many traffic is sending my router for an interface, with each DSCP mark and identify which traffic is this (for example matching to NBAR).

Do you know a way to do this?

Thanks

3 REPLIES

Re: QoS DSCP Analysis

Hello All,

I´m trying to find a way to find how many traffic is sending my router for an interface, with each DSCP mark and identify which traffic is this (for example matching to NBAR).

Do you know a way to do this?

Thanks

Hi,

If you want to check what type of traffic is your router is sending then you need to sniff the interface and capture the packets in  a system with free available tools like etheareal and wireshark just take some sample packets to decode what type of traffic is marked with DSCP vlaue.

Hope to Help !!

Ganesh.H

New Member

Re: QoS DSCP Analysis

Hello,

I´m sorry, but I do not see the way to rate your answer.

I can not use Wireshark, because it´s a remote site with no SPAN.

I was trying to find, if exists, a command like show ip nbar protocol-discovery mixed with some information about QoS.

Thanks anyway

Re: QoS DSCP Analysis

Hello,

I´m sorry, but I do not see the way to rate your answer.

I can not use Wireshark, because it´s a remote site with no SPAN.

I was trying to find, if exists, a command like show ip nbar protocol-discovery mixed with some information about QoS.

Thanks anyway

OK !! I thought in different way anyway check out the below link hope that helps !!

http://www.cisco.com/en/US/docs/ios/12_2/qos/command/reference/qrfcmd10.html#wp1107706

Ganesh.H

576
Views
0
Helpful
3
Replies