Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

QoS in C6509 problem

Hi,

I have Catalyst 6509 and Native IOS 12.1(11r)E1. the WAN connection is 10M bps metro ethernet.

I have configured QoS with dedicated BW, for video conference traffic over a 512 kbps link. but during the peak of video conference traffic, the offered rate is 0 bps.

K1_C6509#2#show policy-map interface fastEthernet 7/47

FastEthernet7/47

service-policy output: K4

queue stats for all priority classes:

queue size 0, queue limit 378

packets output 0, packet drops 0

tail/random drops 0, no buffer drops 0, other drops 0

class-map: Video_K4 (match-all)

0 packets, 0 bytes

5 minute offered rate 0 bps, drop rate 0 bps <===!!!

match: access-group 194

Priority: kbps 512, burst bytes 12800, b/w exceed drops:

The sample config is given below.

¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡

!

class-map match-all Video_K4

match access-group 194

!

policy-map K4

class Video_K4

priority 512

!

interface FastEthernet7/47

description "K4_Metro_Ethernet"

ip address 10.101.4.1 255.255.255.248

duplex full

speed 10

service-policy output K4

no ip redirects

!

access-list 194 permit ip any 10.131.7.0 0.0.0.7

!

end

¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡¦¡

I want to know whether my configuration is correct.

if my configuration is correct, how can I see the dedicated BW?

Thanks for an answer

2 REPLIES

Re: QoS in C6509 problem

show queue fastetherent 7/47

show queuing interface fastethernet 7/47

show policy-map interface fastethernet 7/47

Silver

Re: QoS in C6509 problem

the config looks ok , what is the ip range of the dest ? it looks like you are not getting any hits on ACL 194

116
Views
0
Helpful
2
Replies