Egress scheduling is basicaly priority scheduling and is on by default. Q1 entertains packets with C
OS 0-3 and Queue 2 takes care of 4-7. So if you have a packet in Q2 it is scheduled prior to packets in Q1.
Ingress classification is based on incoming dot1q/dot1p or ISL tag or default port-based tag. it is also possible to overide the incoming tag or to rewrite to specific value. Refer to the configuration guide and command reference for more information.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...