Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

QoS on switch

Hi

I'm installing a set of new switches. Currently we have a voice vlan in our network. My question is, are there any QoS options on the switches, if so how can I use them?

Siwtches: HP/Cisco CGESM Blade modules

CISCO IOS 12.2(25)SED

Thanks for your help.

Dan

2 REPLIES
Community Member

Re: QoS on switch

Hi dan!

CGESM Blade modules support QoS...

http://h18000.www1.hp.com/products/quickspecs/12164_div/12164_div.html

Well you can use AutoQoS and Standard QoS

Following link will take to configuration guide... It opens slowly so keep your patience...:)

http://www.cisco.com/application/pdf/en/us/guest/products/ps6238/c1067/ccmigration_09186a00805e9035.pdf

Anyhow hope it helps

Community Member

Re: QoS on switch

Hi,

I agree with Dan regarding the Auto QoS implementation. I would be enough for your enviroment if your traffic is not that heavy and it is a great feature.

I talked to a friend of my which is a Cisco Network Design engineer and he told me that Auto QoS needs to be implemented on a clean configuration. Basically you need to erase the configuration of the switch, enable QoS typing mls qos and create each port as a trunk port depending the end device (switch, IP Phone, etc). Otherwise you might find issues with it.

Let me know if it helps.

177
Views
0
Helpful
2
Replies
CreatePlease to create content