cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
289
Views
0
Helpful
2
Replies

QoS Suggestion for POS Interfaces on 6509 FlexWAN Module

DAVE GENTON
Level 2
Level 2

I am looking for some direction / information on QoS configuration for Packet over Sonet Interfaces on the flexwan module for the 6509 catalyst. I have not seen much in the documentation.

thanks

Dave

2 Replies 2

donewald
Level 6
Level 6

Dave,

There are a lot of options with QOS on the Cat 6500's. Qos is treated a bit different on the flexwan's vise LAN and OSM modules. The following should be more than enough information to get you started.

Catalyst specific QOS:

http://www.cisco.com/en/US/partner/products/hw/switches/ps708/products_configuration_guide_chapter09186a008007e6fe.html

Cisco IOS Quality of Service Solutions Configuration Guide, Release 12.1:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/qos_c/index.htm

Cisco IOS Quality of Service Solutions Command Reference, Release 12.1:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/qos_r/index.htm

Class-Based Marking:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t5/cbpmark2.htm

Traffic Policing:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t5/dtpoli.htm

Distributed Class-Based Weighted Fair Queueing and Distributed Weighted Random Early Detection:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t5/dtcbwred.htm

Distributed Low Latency Queueing:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t5/dtllqvip.htm

Configuring Burst Size in Low Latency Queueing:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t3/dtcfgbst.htm

Distributed Traffic Shaping:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t5/dtdts.htm

MPLS QoS:

http://www.cisco.com/univercd/cc/td/doc/product/core/cis7600/cfgnotes/osm_inst/mpls.htm

Hope this helps,

Don

Thanks Don, I am familiar with QoS in the 65XX's just new to the POS ports in the Flexwan module, looks like same rules apply for the most part.

Dave