cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
287
Views
0
Helpful
2
Replies

QoS Suggestion for POS Interfaces on 6509 FlexWAN Module

DAVE GENTON
Level 2
Level 2

I am looking for some direction / information on QoS configuration for Packet over Sonet Interfaces on the flexwan module for the 6509 catalyst. I have not seen much in the documentation.

thanks

Dave

2 Replies 2

donewald
Level 6
Level 6

Dave,

There are a lot of options with QOS on the Cat 6500's. Qos is treated a bit different on the flexwan's vise LAN and OSM modules. The following should be more than enough information to get you started.

Catalyst specific QOS:

http://www.cisco.com/en/US/partner/products/hw/switches/ps708/products_configuration_guide_chapter09186a008007e6fe.html

Cisco IOS Quality of Service Solutions Configuration Guide, Release 12.1:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/qos_c/index.htm

Cisco IOS Quality of Service Solutions Command Reference, Release 12.1:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/qos_r/index.htm

Class-Based Marking:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t5/cbpmark2.htm

Traffic Policing:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t5/dtpoli.htm

Distributed Class-Based Weighted Fair Queueing and Distributed Weighted Random Early Detection:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t5/dtcbwred.htm

Distributed Low Latency Queueing:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t5/dtllqvip.htm

Configuring Burst Size in Low Latency Queueing:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t3/dtcfgbst.htm

Distributed Traffic Shaping:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t5/dtdts.htm

MPLS QoS:

http://www.cisco.com/univercd/cc/td/doc/product/core/cis7600/cfgnotes/osm_inst/mpls.htm

Hope this helps,

Don

Thanks Don, I am familiar with QoS in the 65XX's just new to the POS ports in the Flexwan module, looks like same rules apply for the most part.

Dave

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: