I want to limit data over a kilo stream connection. I'm using a 2600 router in the remote location. I've created two class maps...
I think I'm using nbar...
Class Map match-any class-default (id 0)
Match any
Class Map match-all video (id 1)
Match protocol ftp
I want the default class to take precedence over the video class.
I've created a policy..
Policy Map policy1
Class video
Bandwidth 268 (kbps) Max Threshold 64 (packets)
set ip precedence 4
Class class-default
Bandwidth 536 (kbps) Max Threshold 64 (packets)
set ip precedence 0
And assigned this to the serial out interface..
I cant see any difference when testing can any one help?
