Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

QOS

10mb 512kb

LAN--->router1---->router2--->WAN cloud--->HQS router

I am planning to implement QOS policy on router1 outbound interface for VOIP traffic.I do not have controll over router2 for QOS configuration. do u know if, once VOIP traffic leave my router1 outbound interface will have end to end QOS or guranteed bandwidth for voip traffic ?

Here is my sample config on router1

Router(config)# class-map voice

Router(config-cmap)# match ip dscp ef

Router(config)# policy qos-policy

Router(config-pmap)# class voice

Router(config-pmap-c)# priority 24

1 REPLY
Cisco Employee

Re: QOS

You will not. The "source to destination" must agree on the QOS policy. You will have control of what packets leave your router first. And that might be enough. But, after that you will be mixed in with regular traffic in router 2.

81
Views
0
Helpful
1
Replies